Nema 23 Stepper Motor L=76.5mm Gear Ratio 20:1 MG Series Planetary Gearbox
from
$61.30
10 or more $56.45
100 or more $52.30
- Model: 23HS30-2904S-MG20
- Weight: 1.98kg
Available Options
Request a Quote or Ask a Question
Custom Design Options
You can select from the customization options listed below.
This Nema 23 size stepper motor is equipped with MG series high precision gearbox. The gear ratio is 20:1 and the Max. backlash is 50 arc minutes. It's an excellent choice for applications that require good accuracy but low cost.
As MG series gearbox built-in shaft coupling, so you can change the motor or gearbox easily.
Electrical Specification
- Part Number: 23HS30-2904S-MG20
- Motor Type: Bipolar Stepper
- Holding Torque without Gearbox: 1.89Nm(267.65oz.in)
- Rated Current/phase: 2.9A
- Phase Resistance: 1.13ohms
- Inductance: 4.8mH±20%(1KHz)
- Insulation Class: B 130°C[266°F]
Gearbox Specifications
- Gearbox Type: Spur Planetary
- Gear Material: Powder Metallurgy
- Gear Ratio: 20:1
- Efficiency: 90%
- Backlash at No-load:<=50arcmin
- Max.Permissible Torque: 25Nm(265.52lb-in)
- Noise: <=60dB
- Waterproof Rating: IP54
- Lifetime: 20000hours
Physical Specification
- Frame Size: 57 x 57mm
- Motor Length: 76.5mm
- Gearbox Length: 68mm
- Output Shaft Type: Key way
- Output Shaft Diameter: Φ14mm
- Output Shaft Length: 34mm
Connection
A+ |
A- |
B+ |
B- |
Black |
Green |
Red |
Blue |
| Physical Specification | |
| Output Shaft Type | Keyway |
| Shaft Diameter(mm) | 14 |
| No. of Lead | 4 |
| Single Shaft/Dual Shaft | Single Shaft |
| Frame Size(mm) | Nema 23 (57 x 57) |
| Body Length(mm) | 144.5 |
| Gear Ratio | 20 |
| Gearbox Type | Precision Planetary |
| Inventory Method | Dedicated Inventory |
| IP Rating | 40 |
| Gear Material | Powder Metallurgy |
| Electrical Specification | |
| Bipolar/Unipolar | Bipolar |
| Phase Resistance(ohms) | 1.13 |
| Current(A) | 2.9 |
| Inductance(mH) | 4.8 |
| Holding Torque w/o Gearbox(N.m) | 1.89 |
| Has Torque/Thrust Curve? | No |
| Product Type | |
| Product Type | Geared Stepper Motor |