Dual Shaft Nema 23 CNC Stepper Motor 3.4Nm(481.48oz.in) 60x60x100mm 8 Wires

This is the strongest nema 23 stepper motor, it with step angle 1.8deg and size 60x60x100mm. The installation dimensions are the same as the conventional Nema 23 motor, with greater torque. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. A rear shaft can mount encoder, hand wheel or equals. It's holding torque reach 2.48Nm(351.3oz.in) with unipolar connection and 3.4Nm(481.48oz.in) with bipolar connection.

Electrical Specification

• Manufacturer Part Number: 24HS39-3008D
• Motor Type: Unipolar/Bipolar
• Step Angle: 1.8deg
• Holding Torque(Bipolar): 3.4Nm(481.48oz.in)
• Holding Torque(Unipolar): 2.48Nm(351.3oz.in)
• Rated Current(Bipolar Serial): 2A
• Rated Current(Bipolar Parallel): 4A
• Rated Current(Unipolar): 2.8A
• Phase Resistance(Bipolar Serial): 2.8ohms
• Phase Resistance(Bipolar Parallel): 0.7ohms
• Phase Resistance(Unipolar): 1.4ohms
• Inductance(Bipolar Serial): 12.0mH±20%(1KHz)
• Inductance(Bipolar Parallel): 3.0mH±20%(1KHz)
• Inductance(Unipolar): 3.0mH±20%(1KHz)
• Insulation Class: B 130°C[266°F]

Physical Specification

• Frame Size: 60 x 60mm
• Body Length: 100mm
• Shaft Diameter: Φ8.0mm
• Front Shaft Length: 24mm
• Rear Shaft Length: 13mm
• D-cut Length: 20mm
• Number of Leads: 8
• Lead Length: 400mm
• Weight: 1.6kg

Connection