NOTICE SPECIFIC TO INFORMATION AVAILABLE ON THIS WEBSITE. Permission to use any Information from this Server is granted, provided that (1) the below copyright notice appears in its entirety without modification(s), deletion(s) or addition(s) in all copies, (2) both the copyright notice and this permission notice appear, (3) such Information from this Server is used for informational and non-commercial or personal use only and will not be copied or posted on any network computer or broadcast in any media, and (4) no modification of any Information is made. Use for any other purpose is expressly prohibited and may result in severe civil and criminal penalties. Violators will be prosecuted to the maximum extent possible. Information specified above does not include the design or layout of this website or any other Company owned, operated, licensed or controlled website. Elements of Company websites are protected by trade dress and other laws and may not be copied or imitated in whole or in part. No logo, graphic, sound or image from any Company website may be copied or retransmitted unless expressly permitted by Company.
DISCLAIMER. THE INFORMATION IN THIS SITE IS PROVIDED "AS IS" AND WITHOUT REPRESENTATIONS OR WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT PERMISSIBLE UNDER APPLICABLE LAW, COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. THE INFORMATION AND RELATED GRAPHICS PUBLISHED ON THIS SERVER COULD INCLUDE TECHNICAL INACCURACIES OR TOPOGRAPHICAL ERRORS OR OTHER ERRORS OR INACCURACIES, AND CHANGES AND/OR CORRECTIONS ARE PERIODICALLY ADDED TO THEM. COMPANY MAY MAKE IMPROVEMENTS, CORRECTIONS, AND/OR CHANGES IN THE PRODUCTS DESCRIBED HEREIN AT ANY TIME. COMPANY MAKES NO WARRANTY THAT THE FUNCTIONS CONTAINED IN THE MATERIALS ON THIS SITE WILL BE UNINTERRUPTED OR ERROR-FREE, THAT DEFECTS WILL BE CORRECTED, OR THAT THIS DEFECTS WILL BE CORRECTED, OR THAT THIS SITE OR THE SERVER THAT MAKES IT AVAILABLE ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. COMPANY MAKES NO WARRANTIES OR REPRESENTATIONS ABOUT THE USE OR THE RESULTS OF THE USE OF THE MATERIALS IN THIS SITE IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. YOU (AND NOT COMPANY) ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.
LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES, INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE, SHALL COMPANY BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OF, OR THE INABILITY TO USE, THE INFORMATION IN THIS SITE, EVEN IF COMPANY OR A COMPANY AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL COMPANY AND/OR ITS RESPECTIVE SUPPLIERS BE LIABLE FOR ANY KIND OF DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA, OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE, OTHER TORT, OR OTHERWISE ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF SOFTWARE, INFORMATION, PROVISION OF OR FAILURE TO PROVIDE SERVICES, OR INFORMATION AVAILABLE FROM THIS SERVER. IN NO EVENT SHALL COMPANY'S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION (WHETHER IN CONTRACT, TORT (INCLUDING, BUT NOT LIMITED TO, NEGLIGENCE), OR OTHERWISE EXCEED THE AMOUNT PAID BY YOU FOR ACCESSING THIS SITE.
LINKS TO THIRD PARTY SITES. THE LINKS ON THIS SITE: (1) WILL LET YOU LEAVE COMPANY'S SITE, (2) ARE NOT UNDER THE CONTROL OF COMPANY, WHO IS NOT RESPONSIBLE FOR THE CONTENTS OF ANY LINKED SITE OR ANY LINK CONTAINED IN A LINKED SITE, OR ANY CHANGES OR UPDATES TO SUCH SITES, (3) ARE PROVIDED TO YOU ONLY AS A CONVENIENCE, AND (4) DO NOT IMPLY ENDORSEMENT BY COMPANY OF THE LINKED SITE.
JURISDICTIONAL ISSUES. Unless otherwise specified, the materials in the site are presented solely for the purpose of promoting products available in the United States, Canada, and Mexico. This site is controlled and operated by Company from its offices within the State of California, United States of America. Company makes no representation that materials in the site are appropriate or available for use in other locations. Those who choose to access this site from other locations do so on their own initiative and are responsible for compliance with any applicable local laws. Software from this site is further subject to United States export controls. No software from this site may be downloaded or otherwise exported or re-exported (i) into (or to a national or resident of) Cuba, Iraq, Libya, North Korea, Iran, Sudan, Syria, or any other country to which the U.S. has embargoed goods; or (ii) to anyone on the U.S. treasury Department's list of Specially Designated Nationals or the U.S. Commerce Department's Table of Denial Orders. By downloading or using the software, you represent and warrant that you are not located in, under the control of, or a national or resident of any such country or on any such list.
TERMINATION. These terms are effective until terminated by either party, unless there is litigation or a claim by at least one party, then the terms and conditions shall survive, until such litigation or claim is resolved without the possibility of appeal(s) and all materials obtained from all Company sites are destroyed or returned to Company. Access to this website may terminate immediately without notice from Company, if in Company's sole discretion you fail to comply with any term or provision of these terms. Upon termination, you must destroy all materials obtained from this site and any and all other Company site(s) and all copies thereof, whether made under the terms of these terms or otherwise.
OTHER. These terms shall be governed by and construed in accordance with the laws of the State of California, without giving effect to any principles of conflicts of law. You agree that any action at law or in equity arising out of or relating to these terms shall be filed only in the state or federal courts located in or having jurisdiction over Los Angeles County and you hereby consent and submit to the personal jurisdiction of such courts for the purposes of litigating any such action. If any provision of these terms shall be deemed unlawful, void, or for any reason unenforceable, then that provision shall be deemed severable from these terms and shall not affect the validity and enforceability of any remaining provisions. This is the entire agreement between you and Company relating to the subject matter herein and shall not be modified except in writing, signed by both parties.
All rights reserved. TRADEMARKS. OSM, OSM Technology Co.,Ltd. and /or other Company products referenced herein are either Company's trademarks or registered trademarks. Other product and company names mentioned herein may be the trademarks of their respective owners. Any rights not expressly granted herein are reserved.
Established in 1992, OSM Technology Co.,Ltd. began as a consulting company specializing in Stepper motor applications. Throughout its history, OSMTEC has continued to develop its capabilities in the areas of design engineering, manufacturing, and customer service. In 1995, OSMTEC expanded its operatings to include the manufacturing of its own Hybrid Stepper Motor. Since then, the company has developed its product line to include Linear Actuator and Brushless DC Motor.
Our operations are certified to ISO 9001:2000 and QS 9000. All products carry major approvals such as CE and ROSH. With OSMTEC Technology, you get the highest quality products, all made possible by the most dedicated people.
Email: [email protected]
Phone: (+86)574 28837284
Adress: No. 535, Renmin Road, Jiangbei District Ningbo CN 315000
15-4, #799 Hushan Rd., Jiangning District, Nanjing CN, 211100
Powered By OSMTEC © 2022